|
CEMENT BASED
TILE ADHESIVE MORTAR |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
CE-101 |
 SERAWEB
TILE ADHESIVE MORTAR
Cement based tile adhesive mortar.
It's used in indoor places
horizontally and vertically, in
outdoor places and for the adhesion
of coating materials like tiles,
tiles, faience, tiles, glass mosaic
etc. ,in outdoor places on the
horizontal surfaces.
EN 12004 C1 T Class
|
Gray |
25 Kg. Craft Bag |
64-80 Bag |
5 KG/M2 |
 |
CE-102
CE-103 |
 SERAPLUS
HIGH PERFORMANCE
TILE ADHESIVE MORTAR
High performance, single component,
cement based, flex adhesive mortar
with reduced waiting time on the
extended shift feature It is used
for bonding coating materials like
floor and wall Tile tiles, glass
mosaic indoors and outdoors.
EN 12004 C1 TE Class |
Gray
White |
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
5 KG/M2 |
 |
CE-104
CE-105 |
 SERAGOLD
HIGH PERFORMANCE
TILE ADHESIVE MORTAR
Cement based Tile tile adhesive with
improved additional features.
EN 12004 C2 T Class |
Gray
White |
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
5 KG/M2 |
 |
CE-106
CE-107 |
 SERATUT
GRANITE TILE ADHESIVE MORTAR
High performance, single component,
cement based granite adhesive mortar
improved with additional features.
It is used for coating material like
granite Tile tiles, natural granite,
large sized Tile tiles, and
porcelain Tile tiles.
EN 12004 C2 T Class |
Gray
White |
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
5 - 6 KG/M2 |
 |
|
CE-108 |
 SERATUT
KALIN YATAKLI SERAMİK YAPIŞTIRICI
*Kayma özelliği azaltılmış ve açık
bekletme süresi uzatılmış çimento
esaslı özellikle bozuk zeminler için
kalın yataklı seramik yapıştırma
MORTARı.
*Seramik vb. ağır plakalar mermer,
traverten, granit, doğal taş vb.
kaplama malzemelerinin kalın yataklı
uygulama gerektiren durumlarda 2 cm.
kalınlığa kadar iç ve dış mekanlarda
duvara ve zeminlere uygulanır.
EN 12004 C1 TE Class |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
7,5 - 10 KG/M2 |
 |
|
CE-109 |
 SERATUT
TILE ADHESIVE MORTAR OVER TILE
Tile adhesive mortar containing
polymer additive with water
repellent high adherence, reduced
waiting time on the extended shift
feature over elastic Tile. It is
used directly onto old Tile surfaces
with zero water absorption rate,
such as new Tile plates used in
interior and exterior of the walls
and floors.
EN 12004 C2 TE Class |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
5 - 6 KG/M2 |
 |
|
CE-110 |
 SERATUT
TWO COMPENENT ELASTIC WATER PROOF
TILE ADHESIVE MORTAR
Cement based enhanced with special
additives, two component of the high
elasticity and the contribution of
liquid adhesive mortar. Adhesive
mortar bonding of Tile granite plate
that provides waterproofing both
interior and exterior laying medium
and large sizes of plates to a
height of 20 meters |
A Compenent Gray Powder
B Compenent White Liquid
|
25 Kg. Craft Bag
6,25 Kg. Plastic Drum |
As A Set |
5 KG/M2 |
 |
CE-111
CE-112 |
 SERAFLEX
TILE ADHESIVE MORTAR
Cement based, water-repellent,
polymer additive, flexible adhesive
mortar enhanced with additional
features on the extended waiting
period. It is used in coating Tile,
porcelain tile, marble, granite, in
wet areas such as bathroom and
kitchen for indoor, outdoor floor
and wall applications.
EN 12004 C2 T Class |
Gray
White |
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
5 KG/M2 |
 |
CE-113
CE-114 |
 SERATUT
AERATED CONCRETE ADHESIVE MORTAR
Cement based, Aerated Concrete
adhesive mortar with high
performance and polymer additives.
It is used for installation of the
structural elements like Aerated
Concrete and brick with high water
absorption capacity.
EN 12004 C1 TE Class |
Gray
White |
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
4 KG/M2 |
 |
|
CE-115 |
 SERATUT
FAST CURING TILE ADHESIVE MORTAR
Cement based, fast-curing adhesive
mortar enhanced with additional
features. It is used in coating
materials such as Tile, marbles etc.
for furnishing of wall and floor
applications both interior and
exterior. It can be grouted 4 hours
after the application and enables
easy combing after 6 hours and heavy
combing after 12 hours.
EN 12004 C2 F Class |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
5 KG/M2 |
 |
|
CE-116 |
 SERATUT
NATURAL STONE AND DECORATIVE COATING
BRICK ADHESIVE MORTAR
Cement based, high performance,
polymer additive, water repellent
adhesive mortar. It is used for
bonding coating materials like
natural stone and decorative coating
bricks.
EN 12004 C1 TE Class |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
6 KG/M2 |
 |
| |
|
LIQUID TILE ADHESIVE MORTAR |
|
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
AE-117
AE-118 |
 SERATUT
ACRYICOL PASTE TYPE READY TO USE
ELASTIC MULTI-PURPOSE ADHESIVE
Ready to use, multi-purpose, acrylic
emulsion based Tile adhesive mortar
with high performance, water
proofing. It is used in areas for
bonding tiles on gypsum board,
gypsum plaster and painted surfaces
and Tile re-coating on old Tiles,
mosaics and marble, surfaces like
concrete, plaster and screed.
EN 12004 D2 T Class |
White
White |
5 Kg. Plastic Bucket
10 Kg. Plastic Bucket |
As A Set |
3 - 4 KG/M2 |
 |
| |
|
TWO COMPONENT EPOXY BASED
GRANITE ADHESIVE |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
EP-119 |
 SERATUT
EPOCOL TWO COMPONENT EPOXY BASED
TILE ADHESIVE
Epoxy based, two component, water
impermeable to chemicals such as
acid and alkali Tile adhesive and
grout filler with high adherence and
strength. It is used as Tile
adhesive and grout filler interior
and exterior spaces requiring
resistance to acid and alkalis such
as swimming pool, hospitals, and
chemical industry. It is used in
small and large sizes of Tiles that
require resistance to acid and
alkalis special interior and
exterior spaces are as Tile
adhesive. |
White |
25 Kg. Craft Bag
6,25 Kg. Plastic Drum |
A+B 12 Kg. Pl. Bucket |
5,5 KG/M2 |
 |
| |
|
GROUTING MATERIALS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
DD-120
DD-121
DD-122 |
 SERADERZ
COLORED GROUTING MATERIAL 0-6 MM
Cement-based grouting material with
polymer additives and water
repellent features. It is used for
coating tile, tiles, natural stones,
granite tile and marbles, and 1-6 mm
grout joints of the coating
materials like floor and wall tiles,
marble and natural stone.
EN 13888 CD 2 Class |
White
LIGHT COLOUR TONES
DARK COLOUR TONES |
20 Kg. Craft Bag
20 Kg. Craft Bag
20 Kg. Craft Bag |
64-80 Bag
64-80 Bag
64-80 Bag |
3MM FOR 0,7 KG/M2
4 MM FOR 0,95 KG/M2
6 MM FOR 1,5 KG/M2 |
 |
DD-123
DD-124
DD-125 |
 SERADERZ
FLEX COLORED GROUTING MATERIAL 0-6
MM
Cement based colored grouting
material with polymer additives,
water repellent features and high
adherence. It is used in
applications of the coating
materials such as tile, marble,
granite in wet and very wet areas up
to 1-6 mm.
EN 13888 CD 2 Class |
White
LIGHT COLOUR TONES
DARK COLOUR TONES |
20 Kg. Craft Bag
20 Kg. Craft Bag
20 Kg. Craft Bag |
64-80 Bag
64-80 Bag
64-80 Bag |
3MM FOR 0,7 KG/M2
4 MM FOR 0,95 KG/M2
6 MM FOR 1,5 KG/M2 |
 |
DD-126
DD-127
DD-128 |
 SERADERZ
COLORED GROUTING MATERIAL FOR LARGE
SIZE GROUTS 3-20 MM
Cement-based, elastic, colored
grouting mortar with water-repellent
features and polymer additives. It
is used in places with intensive
pedestrian and cargo traffic and wet
areas. It is used as coating
material for 6-20 mm grout joints of
the coating materials especially
like tile, granite tile, marble,
granite, travertine, etc.
EN 13888 CD 2 Class |
White
LIGHT COLOUR TONES
DARK COLOUR TONES |
20 Kg. Craft Bag
20 Kg. Craft Bag
20 Kg. Craft Bag |
64-80 Bag
64-80 Bag
64-80 Bag |
6MM FOR 1,5 KG/M2
8 MM FOR 2 KG/M2
20 MM FOR 3 KG/M2 |
 |
|
DD-129 |
 SERADERZ
FLEX FLUID HIGH ABRASION-RESISTANT
WATER-REPELLENT GROUTING MATERIAL
Cement-based, high adherence, fluid
structure, water-repellent and
highly abrasion-resistant, gray
mortar grouting. It is used in
places with intensive pedestrian and
cargo traffic, and wet areas. It is
used as coating material for 1-6 mm
grout joints of the coating
materials like granite tile tiles,
natural stone and marble.
EN 13888 CD 2 Class |
Gray |
20 Kg. Craft Bag |
64-80 Bag |
6MM FOR 1,5 KG/M2
8 MM FOR 2 KG/M2 |
 |
| |
|
EPOXY GROUTING MATERIAL |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
EPD-130
EPD-131
EPD-132 |
 SERAtut
Fugapox 1-15mm Epoxy Based Grouting
Material
*Epoksi esaslı, iki bileşenli,
kimyasallara (özellikle asit ve
alkalilere) karşı dayanıklı derz
dolgu.
Epoxy based, two component,
chemical-resistant (acid and alkali)
grouting material. It is used in
places requires resistance against
acid and alkalis, renewal for the
worn-out grouts. |
White
Gray
Black |
A+B 3 Kg. Tin Box
A+B 3 Kg. Tin Box
A+B 3 Kg. Tin Box |
As A Set
As A Set
As A Set |
3MM FOR 0,9 KG/M2
5 MM FOR 1,5 KG/M2
8 MM FOR 3 KG/M2 |
 |
| |
|
LEVELLING REPAIR AND
REINFORCEMENT SYSTEMS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
TH-133 |
 SERAtut
Concrete Surface Fine Repair Mortar
Cement based, polymer additive,
fiber-reinforced, high adherent,
concrete repair mortar. It is used
in all buildings for leveling and
repairing of worn, broken and above
ground drilled, It is used locally
for leveling operations and the
repairing of worn or broken concrete
surfaces. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
1MM THICKNESS 1,5 KG/M2 |
 |
|
TH-134 |
 SERAtut
Concrete Surface Course Repair
Mortar
Cement based polymer supported,
fiber-reinforced surface repair
mortar. It is used in all buildings
for leveling and repairing of worn,
broken and above ground drilled; it
is used locally for leveling
operations and the repairing of worn
or broken concrete surfaces. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
1MM THICKNESS 1,8 KG/M2 |
 |
|
TH-135 |
 SERAtut
WP-H High Strength Water Repellent
Repairing Mortar
Cement based, high-fiber-reinforced,
polymer additive, waterproof, high
adherence thyrotrophic repairing
mortar for concrete surfaces. It is
used in repairing and leveling of
all the buildings underground, above
ground, under water grounds, all
kinds of concrete, prefabricated
concrete elements surface and the
repairing of fractures in the
corner, cross the cold joints, bevel
material bridge viaducts, airplane
hangars, landing-from runways, cold
storage and so on. Overhead
surfaces, ceiling and wall repair
applications, the reinforcement bars
as a result of erosion repair of
damaged concrete, leveling and
repairing mortar used as a molding.
EN 13888 CD 2 Class |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
1MM THICKNESS 2 KG/M2 |
 |
|
GR-136 |
 SERAtut-240
High-Strength Fiber-Reinforced
Non-Shrink Grout Mortar
Special cement-based, high-strength
fluid, fiber, special aggregate
grouting mortar. It is resistant
against freezing, thawing, and fuel
and oil for concrete floor surfaces,
high-strength forming, and hard
surface. It is used in indoors and
outdoors, large parking areas,
parking decks, large shopping malls,
large warehouse floors, all concrete
floors exposed to heavy traffic,
aircraft hangars and other areas
over time wear, pitting, soil damage
caused by breaking. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
2 KG/LT |
 |
|
GR-137 |
 SERAtut-60
Saatlik Dayanım Veren Rötresiz
Kaplama ve Ankraj Grout MORTARı
*Erken yüksek mukavemetli saatlik
dayanım veren özel çimento esaslı
akıcı dökülebilir yapıda grout
MORTARı.
*Rögar kapaklarının
yükseltilmesinde, trafik
levhalarının dikilmesi, beton
ankrajlamalar (gömerek sabitleme)
çatlak, boşluk ve oyukların
doldurulması vb. uygulamalarda
kullanılır. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
2 KG/LT |
 |
| |
|
EPOXY BASED REPAIR AND
FIXING MORTARS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
EPT-138 |
 SERAtut
Eporep-42 Two Component Epoxy Based
Solvent Free Adhesive Mounting
Mortar
Two component, epoxy based with
quartz combination grout. It is used
to repair and stabilize the concrete
surfaces for moderate thyrotrophic
and used as epoxy resin- based
repairing and fixing mortar for
concrete in bonding concrete to
concrete, repairing of damaged areas
fixing steel, concrete materials to
concrete surfaces, bonding the
broken edges of stairs etc. |
LIGHT Gray |
A+B 5 Kg. Tin Box |
As A Set |
CONSUMPTION VARIABLE |
 |
|
EPT-139 |
 SERAtut
Eporep Thixo Two Component
Thyrotrophic Based Solvent Free
Bonding and Mounting Mortar
Two component, epoxy based
thyrotrophic bonding and mounting
concrete mortar.It is used as fine
coating adhesive for structural
links and repairing operations. It
is used in common building materials
such as concrete, plaster, metal,
tile, polyester, the assembly of
prefabricated concrete elements of
the columns, repairing of cracks and
fractures, fixing iron sprouts in
vertical and horizontal as surface
protecting coating.It is chemical,
abrasion and impact resistant with
high mechanical strength. |
LIGHT Gray |
A+B 5 Kg. Tin Box |
As A Set |
CONSUMPTION VARIABLE |
 |
|
EPT-140 |
 SERAtut
Cretpox Two-Component Epoxy Based
Concrete Bonding Material
Solvent free, epoxy based, two
component, special additive and
reinforcement protective bonding
primer. It creates a bond between
old and new concrete. It is used as
a bonding material which protects
iron equipment from corrosion,
provides excellent adhesion between
the old and new concrete and
waterproofing , eliminates cold
grout. |
White |
A+B 5 Kg. Tin Box |
As A Set |
1MM THICKNESS 1,2 KG/M2 |
 |
|
EPT-141 |
 SERAtut
Jelpox 05mm Transparent Solvent free
Epoxy Injection Resin
*Epoksi esaslı, iki bileşenli
enjeksiyon reçinesi.
Epoxy based, two component resin
injection. It is used for bonding
the cracks and cavities by filling
max up to 5 mm wide and used to
repair cracks in bridges, tunnels,
industrial structures, columns,
beams, foundations, walls and
floors. |
Transparent |
A+B 3 Kg. Tin Box |
As A Set |
CONSUMPTION VARIABLE |
 |
|
EPT-142 |
 SERAtut
Antipox Two Component Solvent Free
Epoxy Based Reinforcement And Rust
Inhibitor
*Epoksi esaslı, iki bileşenli pas
önleyici.
Epoxy based, two component, rust
inhibitor.It is used as anti-rust of
the iron fittings. |
LIGHT BLUE |
A+B 3 Kg. Tin Box |
As A Set |
CONSUMPTION VARIABLE |
 |
|
EPT-143 |
 SERAtut
Gropox-30 Three Component Cast Epoxy
Resin Mortar (Grout)
It is a solvent-free, 3-component,
pourable grout, based on a
combination of high strength epoxy
resins and specially graded
aggregates. After mixing, it
provides a free flowing
self-leveling epoxy grout. It can be
applied on concrete, stone, mortar,
steel, aluminum, asbestos, cement,
wood, polyester and epoxy as a
self-leveling, flowable epoxy
mortar. |
Sand Gray |
A+B+C 3 Kg. Tin Box |
As A Set |
MİN. 12MM THICKNESS 18 KG/M2
MAX. 50MM THICKNESS KG/M2 |
 |
| |
|
CEMENT BASED PLASTERS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
CS-144
CS-145 |
 SERAtut
Cement Based Machine Plaster
Cement based fiber reinforced , high
strength, plaster .It can be applied
with machine to interior or exterior
locations as to bricks, gas
concrete, briquette walls, pumice
concrete. |
Gray
White |
35 Kg. Craft Bag
35 Kg. Craft Bag |
57 Bag
57 Bag |
1CM THICKNESS 17 KG/M2 |
 |
CS-146
CS-147 |
 SERAtut
Thick Hand Plaster
Cement based, fiber
reinforced thick plaster and applied
with hand. It is used interior and
exterior walls as thick hand
plaster, applied to bricks, gas
concrete, concrete, gross concrete,
briquette walls and roof surfaces. |
Gray
White |
35 Kg. Craft Bag
35 Kg. Craft Bag |
57 Bag
57 Bag |
1 CM THICKNESS 17 KG/M2 |
 |
CS-148
CS-149 |
 SERAtut
Fine Hand Plaster
Cement based, fiber reinforced,
ready to use super fine hand plaster
and it is water repellent and high
strength. It is used as a fine hand
plaster for interior and exterior
facades of all buildings. |
Gray
White |
35 Kg. Craft Bag
35 Kg. Craft Bag |
57 Bag
57 Bag |
1MM THICKNESS 1,5 KG/M2 |
 |
CS-150
CS-151 |
 SERAtut
Super Fine Hand Plaster
Cement based, fiber reinforced,
ready to use super fine hand plaster
and it is water repellent and high
strength. It is used as latest
plaster, which is ready to paint,
interior and exterior walls, walls
or roofs, and gross concrete. |
Gray
White |
35 Kg. Craft Bag
35 Kg. Craft Bag |
57 Bag
57 Bag |
1MM THICKNESS 1,2 KG/M2 |
 |
CS-152
CS-153 |
 SERAtut
Concrete Surface Plaster
Cement based, polymer supported,
fiber reinforced hand plaster for
concrete surfaces. It is applied to
concrete surfaces, tunnels of all
buildings as smooth plaster with
hand. |
Gray
White |
35 Kg. Craft Bag
35 Kg. Craft Bag |
57 Bag
57 Bag |
1MM THICKNESS 1,7 KG/M2 |
 |
CS-154
CS-155 |
 SERAtut
Plaster Satin Finishing Putty
Cement based, polymer supported
satin finishing putty. It is used in
rendering plaster surfaces for
interior and exterior of walls,
repairing pits, holes, capillary
cracks on surfaces. |
Gray
White |
20 Kg. Craft Bag
20 Kg. Craft Bag |
64-80 Bag
64-80 Bag |
1MM THICKNESS 1 KG/M2 |
 |
| |
|
CEMENT BASED WATER
INSULATION SYSTEMS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
WPC-156 |
 SERAtut
Cement based, Single Component,
Crystalline, Capillary Efficient
Water Insulation Material
Single component, waterproofing
slurry consisting of special
additive and cement, penetrating
into the concrete with capillary
effect. It is used in external
waterproofing of foundations
basements lift shafts ,underground
parking structures and storage
rooms, water reservoirs, tunnels and
galleries, structures below the
groundwater level and subject to
water penetration. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
2MM THICKNESS 3 KG/M2 |
 |
|
WPC-157 |
 SERAtut
Cem Quick Cement Based, Fast-Curing
Water Sealing Mortar (Gray)
Cement-based, capable of making very
rapid setting water plugging mortar.
It is used to stop and dry water
leak on all kinds of surfaces, and
in basements, lift shafts,
underground parking structures and
storage rooms, water reservoirs, and
tunnels. |
Gray |
5 Kg. Plastic Bucket |
|
1LT FOR 2 KG |
 |
|
WPC-158 |
 SERAtut
Plaster Protection Plaster Against
To Water, Humidity, Moisture
Cement based, water repellent
protection plaster which gives
smooth surface against to moisture,
humidity.It is used as insulation
hand plaster interior and exterior,
repairing old plaster exposed to
water, moisture, humidity, surfaces
of brick, concrete, pumice, gas
concerete in a layer up to 2 cm. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
MİN. 1CM THICKNESS 17 KG/M2 |
 |
|
WPC-159 |
 SERAset-UV
Single Component , UV Resistant,
Water Insulation Material
Single component, ready to use, uv
resistant available for light
pedestrian traffic insulation
material which has elastic
properties. It is not affected by
temperature differences. Used as
water insulation material in
open-topped terraces, roofs, and
pools which are wet volumes. |
White Liquid |
10 Kg. Plastic Drum |
As A Set |
MİN. 2MM THICKNESS 2 KAT 3
KG/M2 |
 |
|
WPC-160 |
 SERAset
E-206 Two Component Full Elastic
Waterproof Material
*Cimento esaslı, polimer modifiyeli
tam elastik fırça ile uygulanabilen
su geçirimsizlik malzemesi.
Cement based, polymer modified,
waterproof material with full
elastic applied with a brush. Cement
and acrylic based water insulation
material which can be applied with a
brush over concrete requires
waterproofing and high adherence,
cement-based plaster. It is used for
water tanks, foundations and
basement walls, terraces, parapets
and balconies, retaining walls etc. |
A Compenent Gray Powder
B Compenent White Liquid |
20 Kg. Craft Bag
10 Kg. Plastic Drum |
As A Set |
2 MM THICKNESS 2 KAT 3,5-4
KG/M2 |
 |
|
WPC-161 |
 SERAset
E-207 Two Component Elastic Water
Insulation Material
Cement based polymer modified
elastic material applied wit a
brush. Cement and acrylic based
water insulation material which can
be applied with a brush over
concrete requires waterproofing and
high adherence, cement-based
plaster. It is used for water tanks,
foundations and basement walls,
terraces, parapets and balconies,
retaining walls etc. |
A Compenent Gray Powder
B Compenent White Liquid |
20 Kg. Craft Bag
10 Kg. Plastic Drum |
As A Set |
2MM THICKNESS 2 KAT 3,5-4
KG/M2 |
 |
|
WPC-162 |
 SERAlastik
Super Elastic Water Insulation
Material
Cement based polymer modified super
elastic water insulation material
applied with brush. It is used on
concrete which requires high
adherence, waterproofing, cement
based plaster, insulation of
underground basements, high-flow
swimming pool, water tanks waste
water and irrigation channels,
recycling ponds. It is acid
resistant material. |
A Compenent Gray Powder
B Compenent White Liquid |
8 Kg. Plastic Bucket
18 Kg. Plastic Bucket |
As A Set |
2 MM THICKNESS 2 KAT 2,5-3
KG/M2 |
 |
| |
|
LIQUID WATER ISOLATION
SYSTEMS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
WPL-163
WPL-164 |
 SERAset
Elastiflex Adherence Increasing
Water Impermeable Concrete And
Mortar Additive
Water impermeability liquid additive
that fills the capillary pores and
gives elasticity by reacting with
cement and sand in the mixture of
concrete and mortar. It is used as
cement and mortar additive for the
applications such as coating and
plastering mortars, floor screeds,
tunnels, foundations, culverts,
water channels, water storage tanks
and swimming pools, etc. |
White
White |
3 Kg. Plastic Bucket
10 Kg. Plastic Bucket |
|
100KG CEMENT MORTAR WATER
1LT |
 |
|
WPL-165 |
 SERAtut
Ultralastik Super Elastic
Crack-Bridged Water Isolation
Material
Super elastic, single component,
ready to use water isolation
material that can be applied by
brush or roll. It is used as super
elastic water isolation material
especially in flat and sloped roofs
with large surface, channels and
trunk, the edge of chimneys, eaves
and gutters. It doesn't form any
additional lot and suits to all
types of surface. It can be diluted
with water and it's always elastic,
resistant to sunlight, easily
applicable by brush or roll. |
White |
20 Kg. Plastic Bucket |
|
1MM THICKNESS 1-1,5 KG/M2 |
 |
|
WPL-166 |
 SERAtut
Elastiroof Elastomeric Resin-Based
Cream Consistent Water Isolation
Material
Single component, acrylic resin and
elastic water based isolation
material that can be applied by
brush or roll. It can be used to
provide water isolation in the
surfaces such as tile, tile, spray
polyurethane foam, zinc, aluminum,
wood, brick, and bituminous veneers
on terrace and roofs, screed
concrete, and coated surfaces. It
fills in the cracks up to 1-5mm and
creates bridging cracks around the
chimneys, vertical surfaces and
water gutters. |
White |
20 Kg. Plastic Bucket |
|
1 MM THICKNESS 2-2,5 KG/M2 |
 |
|
WPL-167 |
 SERAtut
Penetresil Silicon Based Penetrable
Water Isolation Material
Silicon supported, ready to use
water isolation material that can
easily penetrate on surfaces. It can
be applied easily by everyone onto
all cement based surfaces and fills
in capillary space on the surface by
penetrating. |
Transparent |
20 Kg. Tin Box |
|
2 KATTA 0,150-0,200 KG/M2 |
 |
|
WPL-168 |
 SERAtut
Masticol Space-Grouting Elastic
Water Isolation Material
Single component, multi purpose,
ready to use, paintable and elastic
by taking air-cure space grouting
material. It is used as water
isolation grouting mastic to fill
the immobile or less mobile joints
and grouts or spaces around the
edges of door and window, fixed
equipment, fittings, kitchen
countertops and bathtubs. |
White |
1 Kg. Plastic Bucket |
|
CONSUMPTION VARIABLE |
 |
|
WPL-169 |
 SERAtut
Elastidol Elastic and Fluid Water
Proofing Dilatation Grouting
Material
High-adherent, water proofing
grouting material which is used for
every kind of elastic and fluid
crack and dilatation spaces. It is
used as crack filler for single
component, ready to use, dilatation
grouting and remains elastic after
application. |
White |
20 Kg. Plastic Bucket |
|
CONSUMPTION VARIABLE |
 |
|
WPL-170 |
 SERAtut
Durapox Solvent Free Epoxy Based
Water Isolation Material
Solvent free, epoxy based,
two-component hygienic water
isolation material for reinforced
concrete water storage tanks. It is
used as water isolation material for
metal and iron water storage tanks
which are resistant to detergents,
cleaners and chlorinated water and
preventing the formation of bacteria
and moss. It is highly resistant to
chemicals and water for internal
coating of drinking water storage
tanks, easily cleaned thanks to its
smooth and flat surface. |
White |
A+B 5 Kg. Tin Box |
As A Set |
2 LAYERS 0,3 MICRON FOR
0,150 KG/M2 |
 |
| |
|
CEMENT BASED HEAT INSULATION
SYSTEMS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
M-171 |
 SERAtut
Plaster-Y Heat Insulation Board
Coating Adhesive
It is a cement based XPS and EPS
heat insulation board coating
adhesive. It is used in all
constructions as heat insulation and
rock wool slab coating adhesive. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
5,5 KG/M2 |
 |
|
M-172 |
 SERAtut
Plaster-S Heat Insulation Board
Coating Plastering Mortar
It is cement based surface plaster
for XPS and EPS heat insulation
boards. In all constructions, it is
applied as a top-coat plaster on the
XPS, EPS and rock wool heat
insulation boards. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
5,5 KG/M2 |
 |
|
M-173 |
 SERAtut
Texture Cement Based Mineral Filled
Decorative Plaster
Cement-based, water repellent
plaster. It is used as a decorative
texture coating plaster for external
top-coating which can be applied up
to 2cm and gives decorative textured
surface. |
White |
25 Kg. Craft Bag |
64-80 Bag |
2MM THICKNESS 2-2,5 KG/M2 |
 |
|
M-174 |
 SERAtut
Styro Kleber XPS-EPS Liquid Adhesive
It is an acrylic based liquid which
is ready to be used for heat
insulation systems. It is a
high-additive and elastic, water
proofing adhesive which can be used
to paste XPS-EPS, rock wool and heat
insulation plates onto the surfaces
such as wood, gypsum board, sheet
metal, metal interior and exterior.
|
White |
20 Kg. Plastic Bucket |
|
3,5 KG/M2 |
 , |
| |
|
FLOOR PROTECTION AND COATING
MATERIALS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
Z-175
Z-176
Z-177 |
 SERAtut
Hardfloor Quartz Aggregate Floor
Hardener
Mineral-based, quartz aggregate and
self-colored surface hardener for
concrete floors, which includes
cement, pigments and chemical
additives. It is used in the
surfaces such as warehouses,
wharves, heavy traffic roads,
factory floors, shipyards,
pedestrian paths, sidewalks, shop
floors, parking lots, stations and
garages. It is applied as monolithic
to the new concrete for more
aesthetic outlook and strengthens
the floor coverings and screeds that
require abrasion resistance. |
Gray
Kırmızı
Yeşil |
25 Kg. Craft Bag
25 Kg. Craft Bag
25 Kg. Craft Bag |
64-80 Bag
64-80 Bag
64-80 Bag |
4 KG/M2 |
 |
|
Z-178 |
 SERAtut
5-30 MM- Floor Screed
Early high-strength granulometric
structured special cement additive
floor screed. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
1CM THICKNESS 20 KG/M2 |
 |
|
Z-179 |
 SERAtut
Self-Leveling Floor Laying Screed
Cement-based, polymer modified,
single component and ready to be
used self-leveling floor laying
screed. It is used as a floor laying
screed for the floors that have been
exposed to medium and high density
pedestrian traffic to make them
smooth before the last overlaying,
to provide the desired smoothness of
the ground on the floor in
industrial floors, garages,
workshops and warehouses and
residential. It can be applied onto
the old or new concrete surfaces. |
Gray |
25 Kg. Craft Bag |
64-80 Bag |
1 MM THICKNESS 1,7 KG/M2 |
 |
| |
|
MOLD RELEASE AGENTS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
Z-180 |
 SERAtut
Kapol-M Ready To Use Mineral
Oil-Based Steel Mold Release
Oil-based, mold release liquid used
in less or non absorbency molds.It
is used to separate steel, plastic,
ply-wood molds easily from the
concrete, to increase the efficency
of mold. |
Transparent |
20 Kg. Plastic Drum |
|
0,25 KG/M2 |
 |
|
Z-181 |
 SERAtut
Kapolin %12 Oil Based, Emulsion Of
The Wood And Plywood With Water
Steel Mold Release
It is a high quality mineral oil
with a mixture of private
emulsifier. Oil concentrate
separates molds easily which has
water emulsion. It is used in all
types of reinforced concrete mol,
absorbent mold surfaces to separate
wood molds easily from concrete,
easy cleaning of molds, achieve a
smooth concrete surface |
White |
20 Kg. Plastic Drum |
|
0,5 KG/M2 |
 |
| |
|
CONCRETE CURING MATERIALS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
Z-182 |
 SERAtut
Serakür-HC Hydrocarbon Resin Based
Curing Material
Solvent based, single component,
liquid curing material used for
preventing rapid water loss, the
risk of cracking due to rapid
evaporation of mixing water and
enabling optimum hardness of
concrete. It is used in concrete
floor coverings, surface hardener
applied floorings, screed concrete,
hot air conditioning of concrete
castings, water tanks surfaces etc.
|
Transparent |
25 Kg. Plastic Drum |
|
0,1 KG/M2 |
 |
|
Z-183 |
 SERAtut
Serakür-AC Acrylic Resin Based
Concrete Curing Material
A curing material for new concretes,
mortars and surface hardeners. An
acrylic resin based, single
component curing material used for
preventing the water loss in
concrete, plaster, cement-based
mortars and surface hardeners, the
risk of cracking due to rapid
evaporation of mixing water. It is
used in concrete slabs, surface
hardener applied floorings, parking
lots and storage houses as a varnish
for rough surfaces. |
White |
25 Kg. Plastic Drum |
|
0,15 KG/M2 |
 |
| |
|
MORTAR ADDITIVES |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
HK-184 |
 SERAtut
-1 Water Proof Liquid Mortar
Additive
Water proof mortar additive in the
areas with normal setting plug. It
ensures waterproofing by filling the
gaps in the capillary concrete and
mortar. It is used for coating,
walling mortar and concrete such as
tunnel, basement, culverts, canal
and water reservoirs as liquid
mortar additive. |
White |
20 Kg. Plastic Drum |
|
100 KG CEMENT FOR 1-3 LT |
 |
|
HK-185 |
 SERAtut
Latex Adherence Enhancing And Water
Proofing Liquid Mortar Additive
Liquid mortar additive enabling high
adhesiveness and water proofing to
mortar. It is used to increase the
adherence, bending and tensile
strength, elasticity and chemical
resistance of mortars, and
resistance of mortars against water
abrasion. It enables binding for
plaster, screed, concrete and
construction joints and provides
high adherence for the repair
mortars, cement paint, foam and gas
concrete surfaces. |
White |
25 Kg. Plastic Drum |
|
|
 |
|
HK-186 |
 SERAtut-G
Liquid Volume Expanding Plastifiyen
Mortar Powder Additive
Plastifiyen powder mortar additive
used in mortars instead of lime by
adding micro-bubbles to the mixture,
enabling liquid volume expanding and
increasing fluidity. It enables easy
process ability of cement by
increasing the fluidity of cement
and adhesion feature with excellent
air-entraining. |
White |
20 Kg. Plastic Bucket |
|
100 KG CEMENT FOR 0,1 KG
MORTAR |
 |
|
HK-187 |
 SERAtut
Retasol Plug Retarder Liquid Mortar
Additive For Concrete And Mortars
Plug retarder and normal plasticizer
liquid mortar additive used in hot
climate conditions. It is a liquid
additive used in hot weather as
plaster mortar for concreting, floor
screeding. It is used for smooth
concrete applications. It has
prolonged setting time in hot
weather, accelerates the hardening
after setting, enables reducing the
amount of water without decreasing
operability and gives no harm to the
iron equipment. |
White |
25 Kg. Plastic Drum |
|
100 KG CEMENT FOR 2-3LT |
 |
HK-188
HK-189 |
 SERAtut
Antifreeze Liquid Mortar Additive
Preserving the Concrete From
Freezing in Cold Weather
Reliable and chloride-free liquid
mortar additive enabling rapid
concreting by accelerating the plug
in low temperature. It is used to
provide the continuity of work that
requires cancellation of concreting
due to the cold and frost risk. It
is used for continuing light frost
effect throughout the day, when
frost is expected overnight and in
cases of sudden temperature drop.
Features/Advantages: Increases the
resistance of mortars against
freezing, sets and reduces the
amount of time limitation necessary
for the resistance against freezing. |
Transparent
Transparent |
7,5 Kg. Plastic Drum
20 Kg. Plastic Drum |
|
100 KG CEMENT FOR 2-3LT |
 |
| |
|
SURFACE PRIMERS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
AS-190 |
 SERAtut
Astarol Multi-Purpose Surface Primer
Single component, multi purpose
acrylic based copolymer primer by
decreasing the absorbency of
surfaces and increasing the bonding
strength of cement based material.
It is used as primer for gas
concrete, limestone, brick, concrete
walls and gypsum based coatings and
adherence promoter primer reducing
the absorption before the
application of bonding screed,
plaster and tiles under gypsum panel
surfaces and applications of
self-leveling floor screeds. |
White |
20 Kg. Plastic Bucket |
|
0,15 - 0,2 KG/M2 |
 |
|
AS-191 |
 SERAtut
Pürüzol Splicing Enhancer Surface
Roughening Primer
Quartz aggregate granulometric
surface enhancing primer with high
adhesion strength forming a rough
surface on old glossy surfaces to
provide the lining of large-scale of
new tile. It is used as primer
sticking to tile, wood, osb and
metal surfaces providing the
application of new coating on the
old, bright, reduced absorption and
friction free interior and exterior
surfaces. |
White |
20 Kg. Plastic Bucket |
|
0,3 - 0,5 KG/M2 |
 |
| |
|
STAIN REMOVERS AND
PROTECTORS |
|
CODE |
PRODUCT NAME AND DESCRIPTION |
COLOUR |
PACK KG |
TRACK |
CONSUMPTION |
PACK TYPE |
|
AS-192 |
 SERAtut
Fuga Guard Grout Protector and Stain
Preventer
Silicon-based, ready to use grout
protector and stain preventer which
penetrates into the grouts deeply.
It is used to make the coating
materials and grout joints resistant
to dirt and corrosion. It protects
kitchen and bathroom counters'
joints against water and prevents
stain formation, does not form a
film layer on the surface and affect
the natural outlook and colors of
grouts. |
Transparent |
500 Gr. Plastic Bucket |
|
0,3 KG/M2 |
 |
|
AS-193 |
 SERAtut
Clean Ment Cement Stain Remover
Cement stain remover reinforced with
special chemicals. It is used to
clean the top surfaces of tile,
granite and natural stone coatings
contaminated with cement based
construction waste such as mortar
and joint filler. |
Red |
1 Kg. Plastic Bucket |
|
0,5 - 0,7 KG/M2 |
 |
|
AS-194 |
 SERAtut
Stone Seal Natural Stone, Brick,
Marble And Travertine Stain
Preventer And Coating Material
Protecting material that penetrates
deeply into the coating materials
such as natural stone, brick, marble
and travertine. It is used as a
protective material which is applied
with anti dust and dirt
waterproofing roll, brush or spray.
It forms a thin layer on the
surface. |
Transparent Shine |
5 Kg. Tin Box |
|
0,1 - 0,15 KG/M2 |
 |
|
AS-195 |
 SERAtut
Stone Seal Natural Stone, Brick,
Marble And Travertine Stain
Preventer And Coating Material
Protecting material that penetrates
deeply into the coating materials
such as natural stone, brick, marble
and travertine. It is used as a
protective material which is applied
with anti dust and dirt
waterproofing roll, brush or spray.
It forms a thin layer on the
surface. |
Transparent Mate |
5 Kg. Tin Box |
|
0,1 - 0,15 KG/M2 |
 |
|
AS-196 |
 SERAtut
Stone Seal Natural Stone, Brick,
Marble And Travertine Stain
Preventer And Coating Material
Protecting material that penetrates
deeply into the coating materials
such as natural stone, brick, marble
and travertine. It is used as a
protective material which is applied
with anti dust and dirt
waterproofing roll, brush or spray.
It doesn't form a layer on the
surface. |
Transparent |
5 Kg. Tin Box |
|
0,5 - 0,7 KG/M2 |
 |